P30 DUAL CHANNEL SMART CHARGER USER GUIDE
Thanks for purchasing the ISDT P30 Smart Charger. Please visit: www.isdt.co for more details on the functions of this smart charger, as well as purchase various accessories. Functions of products will be kept on upgrading, the manual in your hand may be different from the actual operation, please refer to the actual functions. Warnings and Safety Tips For your safety and a better user experience, please read this manual and follow the instruction before using the new charger.
Port / Key USB Connection Power Type-C Input Upgrading Port CH1 Balance Port CH1 Touch Key Fan Vent Display Screen CH1 Power Output CH2 Touch Key CH2 Power Output CH2 Balance Port Key operation instructions (under standby interface) CH1 Middle Key：Short press to enter CH1 detail page, Long press to enter CH1 task setting menu. CH2 Middle Key：Short press to enter CH2 detail page, Long press to enter CH2 task setting menu. Press and Hold the CH1 ad CH2 Middle Key to enter advanced settings menu.
How to Confirm Charging Current Make sure to know the maximum charging current of the battery before charging, never use excessive current to charge to damage your battery, which will result in over heat even explosion during the charging process. The charging and discharging capacity of battery is usually marked with C value. Multiplying the charging C value and battery capacity equals to the maximum charging current supported by the battery.
Charge Balancing port is strongly recommended when charging lipo battery, which can make sure to monitor voltage on each cell battery and balance it when charging. Warning beeper will yell before start charging lipo if in non-balance mode(no connecting with balance port). Current setting range: 0.2~30A The battery type, cell count and charging current are auto set accordingly when connecting with BattGo battery. Discharge Current setting range: 0.2~3.
Paralled task Select this setting, it could output Max Power to one battery. Find a power splitter or 1/2 power cord, one end connect with the battery, and the other two ends connect with the battery output port. The battery balance port could connect with any of the charger's balance port. Connect the charger with the power supply and power on, and connect your battery as required, select this setting on the advanced setting menu to set the task parameters.
Wireless connection Select this to put the charger into Bluetooth pairing mode. While selecting this, open the isdGO App on your phone and click on the "+" in the upper right corner to search, Select the corresponding device in the list for Bluetooth connection. After establishing a Bluetooth connection with a mobile phone, you can view detailed parameters or set tasks through the mobile phone.
