Q8 Max User Manual

Destroy
Connect the battery to be scrapped, and select the scrap function in task options,
which is capable to discharge the battery to 0V.
Current setting range: 0.2~3.0A
The battery type and cell count are auto set accordingly when connecting with
BattGo battery.
DC Power supply
The charger can be used as a DC power supply when choosing this function,
with adjustable voltage 2~30V, and current 1.0~5.0A.
The battery type, parameter and current are not optional in this task.
Storage
Current setting range: 0.2~30.0A
The battery type, cell count and storage current are auto set accordingly when connecting
with BattGo battery.
Charging Screen
Touch the touch board to shift the charging information, as cell voltage, cell internal
resistance, BattGo information, working parameter.
The cell voltage and internal resistance are only on display in balancing charging mode.
The BattGo information will be displayed only when connected to the BattGo battery,
and the cell voltage is able to be displayed without connected to the balance port.