Q8 Max User Manual

Under the standby interface, long touch the touch board to enter the system setting menu:

System Setting Menu

Min. input voltage protection 10~31V:

All tasks in operation will be stopped at once and hint warning of low voltage, when the

input voltage is lower than the input voltage as set up. It will protect the battery from being

discharged when using battery pack as power supply.

Max. input power setting 100~1100W:

If the input power is smaller than the max working power (1000W), please set up the

parameter as the actual output power as max input, to protect the input power and

enable the charger to work stably.

Buzzer volume:

The operation sound will be shielded when the volume is oﬀ, except the warning error beep.

Self-test:

Enter system setting. select self-test task

Calibration:

The input voltage, output voltage and balance voltage of the charger can be calibrated

with this task.

*All product photos, statements and literature are for reference only. For up-to-date information,

please visit our oﬃcial web www.isdt.co

ISDT reserves the right of ﬁnal explanation and revision for the terms.

406Q8MAX000