φsimple BLUETOOTH CASSETTE ADAPTER WITH HANDSFREE User Manual
CHARGING GUIDE How to Charge BTHFS380 Plug the micro-USB end of the enclosed charging cable into the CallCassette (A). Plug the USB end of the BTHFS380 charging cable into a USB power source. When connected to a power source, the LED light will glow red while charging. When charging is complete, the red LED light will turn off. You’re now ready to pair. INSTALLATION INSTRUCTIONS Insert CallCassette (A) into your car radio, noting “THIS SIDE UP”.
Turn on BTHFS380 by pressing the Power Button on the CallCassette (A). The LED light will begin flashing red/blue to indicate power is on and is ready for pairing. On your device, access your music/media player of choice. Use the Control Button (B) for functions such as play, pause and track forward (Performance and functions may vary depending on the device and app used.
Action Description PLAY Press button once FORWARD TRACK Press button twice REVERSE Press button three times ENABLE VOICE RECOGNITION Press button and hold Action ACCEPT/END CALLS Description Press Control Button once (B)
How to Power Off BTHFS380 To power off, press the power button on CallCassette (A) for 5 seconds. The LED light will flash red and then turn off. ABOUT AUTO-CONNECT When powered on, CallCassette will Auto-Connect to the last device paired if the device is available. ABOUT POWER SAVE MODE If you forget to turn it off, don’t panic, CallCassette will automatically shut down after 3 minutes when out of range of your smartphone. Your CallCassette battery life is approximately 5 hours.
． BTHFS380 Rev C FCC ID:2ATYS-BTHFS380 SAFETY WARNING Please Read! FCC WARNING This device complies with part 15 of the FCC Rules. Ope,ation is subject to the following two conditk>ns t1l this device may not cause harmful interference. and tzl this device must accept any interference cec
