Add Auxiliary Audio to Your Factory Radio Owner’s Manual PXAUX iSimple® A Division of AAMP of America™ 13190 56th Court Clearwater, FL 33760 Ph. 866-788-4237 support@isimplesolutions.com ©2013 AAMP of Florida, Inc. www.isimplesolutions.com Rev.
Table of Contents Introduction Pages 4 Compatibility Notes 4 Dipswitch Settings 4 Installation 5 Ford/Lincoln/Mercury ISFD531 6 General Motors ISGM531 6 General Motors ISGM532/ISGM533 7 General Motors ISGM534 7 General Motors ISGM535 7 Honda ISHD531 8 Hyundai ISHY531/ISHY532 8 Mazda ISMZ531 8 Nissan ISNI531/ISNI532 8-9 Toyota ISTY531 9 Volkswagen ISVW532 10 Troubleshooting 10 Warranty Information 12
PXAUX & Optional Add-ons Factory Radio (not included) Vehicle Specific Harness (actual harness may vary) PXAUX Interface RCA Input RCA Input OR OR 3.5mm Input 3.
Introduction Thank you for purchasing the iSimple® PXAUX. The PXAUX is designed to provide endless hours of listening pleasure from your factory radio. To ensure that your auxiliary audio input performs correctly with your radio, we recommend that you read this entire manual before attempting installation of the PXAUX. This interface allows connectivity for two auxiliary audio inputs. Compatibility Notes Please visit www.isimplesolutions.
Installation 1. When making electrical connections it is always recommended that the vehicle’sbattery be disconnected from the electrical system before performing the installation. Please Note: If the radio is equipped with a built in CD Changer, please remove ALL discs before proceeding to prevent damage to the radio’s CD mechanism. 2. Carefully remove the trim panels covering the bolts that secure the radio into the dash cavity.
Ford/Lincoln/Mercury ISFD531 Operation Selecting AUX: Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until “AUX1” is displayed on the screen. When you press the “AUX” button, you will see the corresponding “SAT” modes, a slight delay, and then the current mode will be displayed. Selecting between AUX1 / AUX2 Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until “AUX1” or “AUX2” is displayed on the screen.
General Motors ISGM532/ISGM533 Operation Selecting AUX Press the “BAND” button a few times until XM is displayed on the screen. Immediately turn the rotary knob to scroll through available sources. Once “AUX1” is displayed press PRESET 2 to select it. Selecting between AUX1 / AUX2 If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle through the available sources. Once “AUX1” or “AUX 2” is displayed on the screen press PRESET 2 to select it.
Honda/Acura ISHD531 Operation Satellite Radio Mode Selecting AUX Press the “XM” button to switch to SAT. Immediately turn the rotary knob or press TUNE UP to scroll through available sources. Once “AUX1” is displayed, press PRESET 6 to select it. Selecting between AUX1 / AUX2 Press the “XM” button to switch to SAT. Immediately turn the rotary knob or press TUNE UP to scroll through available sources. Once “AUX2” is displayed, press PRESET 6 to select it.
Nissan ISNI531/ISNI532 Operation Selecting AUX Radios equipped with a “SAT” button Press the “FM” button and then the “SAT” button. Immediately press the “SEEK>>” button to scroll through the available sources. Once “AUX1” is displayed, press the “<
CD Changer Mode Selecting AUX Press the “DISC” or “AUX” button to switch to CD Changer mode. You are now in the AUX1 mode. Selecting between AUX1 / AUX2 If you are currently in “AUX1” or “AUX2” mode press the “DISC ▲” button to cycle between AUX1” & “AUX 2” . Volkswagen ISVW532 Operation Selecting AUX Press the “CD” button twice to switch the radio to the CD Changer source. This will access “AUX1”. Selecting between AUX1 / AUX2 To select “AUX2” press preset #2. To select “AUX1” press preset #1.
Notes 11
Warranty Information One Year Limited Warranty The quality controls used in the manufacture of this product will ensure your satisfaction. This warranty applies only to the original purchaser of this product from an authorized iSimple® dealer. This warranty covers any supplied or manufactured parts of this product that, upon inspection by iSimple® authorized personnel, is found to have failed in normal use due to defects in material or workmanship. This warranty does not apply to installation expenses.