Owner's Manual

Tranzlt
Ll
N K
1.
Introduction
Thank you for choosing the
iSimple Tranzlt LINK as your audio input
solution.
The
Tranzlt LINK
is
designed
to
provide the connecting
link between your
portable
audio device and your
FM
radio. Using the
supplied
accessories, you can connect
virtually
any audio source into any
FM
equipped radio.
The
Tranzlt LINK will
route the audio from your device through your factory radio. If
your
audio source is
an
iPod, iPhone, or iPad
featuring a Lighting connector, this interface will also
provide battery charging when connected.
2.
Tranzlt LINK Components
• One Radio
Input Interface
• One Power Cable
with on/off switch
• One Audio Cable
(6ft) with Lightning Connector
3.
Installation
Connecting
an
iPod, iPhone, or iPad
iPod Specific
installation
instructions
1 )Connect the audio connector from the Lightning cable
to the audio input on the
Tranzlt LINK.
2) Connect the two-pin power connector on the Lightning
cable
to the connector
labeled
"Connect
to
cable"
in
the
Tranzlt LINK
wiring harness.
3) Route the connector for iPod, iPhone,
or iPad to your chosen
location
in
your automobile.
Common
locations are the
glove
box, center
console
or
in
a mounted
cradle
for
iPod, iPhone,
or
iPad.
You
will need
to
access the
iPod,
iPhone, or iPad
in
order
to
change music selections.
Antenna
Out
*
Antenna
In*
RCA
connectors
* Some radios require
the
addition
of
antenna connection adapters