Owner's Manual

ManualsBrandsiSimple ManualsApple & Android integrationIPod® Interface Kit for Honda or Toyota

Make Model Year Part # Harness Dip Switch Settings* Vehicle Specific Notes

Scion

tC 2003-2007 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

xA 2003-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

xB 2003-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Make Model Year Part # Harness Dip Switch Settings* Vehicle Specific Notes

Suzuki

XL-7 2007 PXDP3 PXH3GM1 or PXH3GM1X n/a

Make Model Year Part # Harness Dip Switch Settings* Vehicle Specific Notes

Toyota

4Runner 1998-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

4Runner 2005-2007 PXDP2 PXH2TY1 2,4 ON

4Runner 2006-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Avalon 1998-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Avalon 2005-2007 PXDP2 PXH2TY1 2,4 ON

Avalon 2006-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Camry 1998-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Camry 2005-2007 PXDP2 PXH2TY1 2,4 ON

Camry 2006-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Celica 1998-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Corolla 1998-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Corolla 2006-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Echo 2000-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

FJ Cruiser 2007 PXDP2 PXH2TY1 2,4 ON

Highlander 2001-2004 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Highlander 2005-2007 PXDP2 PXH2TY1 2,4 ON

Highlander 2006-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Land Cruiser 1998-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Land Cruiser 2005-2007 PXDP2 PXH2TY1 2,4 ON

Land Cruiser 2006-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Matrix 2003-2004 PXDP PXHGM3 1,3,8 ON

Matrix 2005-2007 PXDP2 PXH2TY1 2,4 ON

Matrix 2005-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

MR2 2000-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

RAV4 1998-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

RAV4 2005-2007 PXDP2 PXH2TY1 2,4 ON

Sequoia 2001-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Sequoia 2005-2007 PXDP2 PXH2TY1 2,4 ON

Sequoia 2006-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Sienna 1998-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Sienna 2005-2007 PXDP2 PXH2TY1 2,4 ON

Sienna 2006-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Solara 1999-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Solara 2005-2007 PXDP2 PXH2TY1 2,4 ON

Solara 2006-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Supra 1998 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

T100 1998 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Tacoma 1998-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Tacoma 2005-2007 PXDP2 PXH2TY1 2,4 ON

Tacoma 2006-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Tercel 1998 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Tundra 2000-2007 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness

Tundra 2007 PXDP2 PXH2TY1 2,4 ON

Yaris 2005-2007 PXDP2 PXH2TY1 2,4 ON

Prius All Years Not Compatible

Highlander 2008 Not Compatible

Make Model Year Part # Harness Dip Switch Settings* Vehicle Specific Notes

Volkswagen

All Models (Except Below) 1998-2006 PXDP PXHVW1 1,8 ON Trunk Mounting Location

All Models 1998-2006 PXDP PXHVW2 1,8 ON For use with Single DIN radios

All Models 2003-2006 PXDP PXHVW3 1,8 ON For use with Double DIN radios

IMPORTANT SCION APPLICATION INFORMATION

PXDP3: PXH3GM1 is for vehicles without XM, connects to the back of the factory radio. PXH3GM1X harness retains XM and connects to the XM tuner. Non-Navigation radios must have a “CAT” button on the faceplate. Compatible with navigation radios for the applicable

vehicles listed above. Compatible with existing factory CD changer. Not Compatible with 2008 GM vehicles.

IMPORTANT TOYOTA APPLICATION INFORMATION

*Dip Switch Settings: Please See Product Instructions for Dip Switch Configuration Settings

PXDP2: Radio must have a button labeled "SAT". Not compatible with factory satellite. If satellite is installed, it must be disconnected. Fully compatible with factory installed Toyota Navigation Systems. Not compatible with Hybrid vehicles.

PXDP: Not compatible with any factory external audio source such as: XM tuner, CD changer, or Cassette player. These devices must be disconnected during the installation and will no longer function.

IMPORTANT SCION APPLICATION INFORMATION

PXDP3: Non-Navigation radios must have a “CAT” button on the faceplate. Compatible with all navigation radios. Compatible with existing factory CD changer. PXH3GM1 is for vehicles without XM, connects to the back of the factory radio. PXH3GM1X harness retains XM,

connects to the XM tuner.

*Dip Switch Settings: Please See Product Instructions for Dip Switch Configuration Settings

PXDP: Not compatible with any factory external audio source such as: XM tuner, CD changer, or Cassette player. These devices must be disconnected during the installation and will no longer function. When using the PXHTY3 with 2006-2007 vehicles the green wires must

be cut on the PXHTY3 harness. Fully compatible with factory installed Toyota Navigation Systems. Not compatible with Hybrid vehicles.

*Dip Switch Settings: Please See Product Instructions for Dip Switch Configuration Settings