Owner's Manual
4.
Dipswitch
Settings
All4
dipswitches MUST
be
set
in
the OFF (up) position for proper operation.
5.
Installation
1.
When making electrical connections
it
is
always recommended that
the
vehicle's
battery
be
disconnected from the electrical system before performing the installation
2.
Carefully remove the trim panels covering the bolts that secure the
radio
into
the dash
cavity.
Remove these
bolts,
and
carefully
pull
the radio from the dash of
the vehicle. This will provide access to the factory radio connectors where
you
will
connect the Media Gateway harness.
3. Disconnect the factory 20-Pin harness from the back
of
the
radio.
Disconnect the
AM/FM antenna from the radio.
5. Connect the 8-Pin mini-din iPod cable into the first port
on
the Media Gateway
(furthest away from dipswitches
).
Carefully
run
the
11
foot
iPod
cable behind the
dash
to the location where the
iPod
will
be
mounted or stored (for example the glove
box
or center console). This location
will
vary based
on
the vehicle,
and
the
custorl'lers
preference. When running this cable through the dash,
be
sure to seoure it
S!NSY
from
moving parts or sharp metal edges that may damage the cable.
4.
If
you
are installing the HDRT
HD
Radio
tuner (HDRT sold separately): Make
the
following connections before connecting the PXAMG
to
the
vehicle. Plug
the
3
foot
HD Radio Cable (8-Pin mini-din to 8-
Pin
mini-din) cable into the second port (closest
to the dipswitches)
on
the Media
Gateway.
Connect the other
end
of1hls albia
into
the
HD
Radio
tuner.
Connect the factory antenna cable into the antenna
connectiOn
on
the
HD
Radio tuner (HDRT). Some vehicles may require the use
of
a
Beet
Kits
BAA26 antenna adapter to make this connection.
6. N
ext,
plug the 20-pin male connector
on
the
PGHSB1
harness
into the
back
of
the
factory
radio, then connect the factory 20-pin harness into the female
conneG~Jton
the PGHSB 1 harness.
Be
sure to make a firm connection but
do
not force
It
PlUg
the black micro-fit 24-pin connector
on
the
PGHSB
1 harness into the PXAMG
Media
Gateway
box.
3