Instructions / Assembly

Note:

Bolt should go through

OUTSIDE hole on both

sides of middle arc.

Correct:

(Both Sides)

Yes

NU2110 4’ Firewood Holder

Addendum to Assembly Manual

Additionally, we do recommend TWO people assemble the Firewood Holder.

Please see the below corrected line art drawing and assembled picture.

The drawing in the assembly manual was incorrect. The holes in the Base Sides (NUP4001)

must assemble though the FIRST holes in the Bottom Frame (NUP4002) with the M8x100mm

bolts (NUP4005) in all four places. Assembling as shown in the original manual drawing will

result in the other holes being unable to align.

NU2110 Addendum 20180913 Rev. A.2

PAGE 1
NU2110 4’ Firewood Holder Addendum to Assembly Manual The drawing in the assembly manual was incorrect. The holes in the Base Sides (NUP4001) must assemble though the FIRST holes in the Bottom Frame (NUP4002) with the M8x100mm bolts (NUP4005) in all four places. Assembling as shown in the original manual drawing will result in the other holes being unable to align. Please see the below corrected line art drawing and assembled picture. Additionally, we do recommend TWO people assemble the Firewood Holder.