Owners manual
3. Fill the tanks with WET SAND. 4. Make sure the tanks are fully filled with
the wet sand.
6. Follow the same procedures in step 5 to
complete the whole plasc cover.
Umbrella may not withstand high winds. To avoid injury or damage, do not use in
be filled to capacity in order to work properly.
1. Before storing your base, make sure it is completely dry and clean.
2. Clean with damp cloth.
Fig. 3 Fig. 4
Fig. 5 Fig. 6
Fig. 7 Fig. 8
WARNING:
Storage:
D
C
B
8. Now the base is fully assembled.7. Place the plasc cover over the filled tanks
and place the funnel over the pole onto the cover.
5. Take two plasc cover parts and turn so
boom side is up. Place one over the other
so screws, pre-molded on each cover, are
inserted through the holes on connecng cover
as shown. Use plasc nuts to hold parts together.
10/15