NU6862 (BLACK) / NU6863 (CHAMPAGNE) / NU6864 (HUNTER GREEN) / NU6865 (NAVY BLUE) NU6862 (NOIR) / NU6863 (CHAMPAGNE) / NU6864 (VERT CHASSEUR) / NU6865 (BLEU MARIN) NASSAU 6.5-FT X 10-FT RECTANGLE UMBRELLA 7 PARASOL RECTANGULAIRE NASSAU DE 6,5 PIEDS X 10 PIEDS Assembly Instructions Instructions de montage Questions, problems, missing parts? Before returning to your retailer, call our Consumer Hotline at 1-800-759-0977, Monday – Friday, 8am – 5pm (CST).
THANK YOU!/MERCI! Thank you for purchasing this product! We work around the clock and around the globe to ensure that our products maintain the highest possible quality. However, in the rare case of issues during assembly or use of this product, please contact our Consumer Hotline at 1-800-759-0977 for immediate assistance before contacting your retailer. Please read the warranty information at the back of this User Manual for further details.
CARE AND MAINTENANCE/ENTRETIEN ET MAINTENANCE • Clean with mild soap and lukewarm water, rinse, and air dry. • When not in use, close and cover umbrella with a protective cover (not included). • Allow a wet canopy to dry while in open position. • Store the product indoors in a cool, dry place. • Blue Wave cast iron and steel plate bases require minimal maintenance. Base should be kept clean. Do not let dirt build up on the base. Cleaning with mild soap and lukewarm water is all that is needed.
INSTALLATION AND ASSEMBLY/INSTALLATION ET ASSEMBLAGE A B PARTS LIST — NU6862 (BLACK) PARTS LIST — NU6863 (CHAMPAGNE) ITEM PART DESCRIPTION PART NUMBER PART QTY ITEM PART DESCRIPTION PART NUMBER PART QTY A Canopy/Mainframe NU6862 1 A Canopy/Mainframe NU6863 1 A Solar Panel NUP0026 1 A Solar Panel NUP0026 1 A Crank Handle NUP0074 1 A Crank Handle NUP0074 1 B Bottom Pole NUP0062 1 B Bottom Pole NUP0062 1 PARTS LIST — NU6864 (HUNTER GREEN) PARTS LIST — NU6865 (NAVY
INSTALLATION AND ASSEMBLY/INSTALLATION ET ASSEMBLAGE ASSEMBLY/ASSEMBLAGE Before beginning assembly of product, make sure all parts are included by checking the contents of the carton against the Parts List. All parts and hardware are required. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 3 minutes. No tools required for assembly.
INSTALLATION AND ASSEMBLY/INSTALLATION ET ASSEMBLAGE ASSEMBLY/ASSEMBLAGE SETUP Carefully remove umbrella from box. Insert bottom pole into canopy/mainframe pole. Line up button with hole and snap into place. Insert assembled umbrella into weighted base (sold separately). INSTALLATION A Déballez le parasol avec soin. Placez le parasol debout et insérez-le dans le tube inférieur. Alignez le bouton avec l’ouverture et fixez en place. Insérez le parasol assemblé dans la base lestée (vendue séparément).
INSTALLATION AND ASSEMBLY/INSTALLATION ET ASSEMBLAGE ASSEMBLY/ASSEMBLAGE TILTING UMBRELLA Push the button on the tilt mechanism to tilt the umbrella canopy to left or right. INCLINAISON DU PARASOL Appuyez sur le bouton du mécanisme d'inclinaison pour incliner le parasol à gauche ou à droite CLOSING UMBRELLA Push the button on the tilt mechanism once again & bring the umbrella back to a horizontal position. Then turn crank handle in counter clockwise direction to close the umbrella.
Step 5 Attach the Solar Panel ( part L ) on the top of Main Umbella ( part A ) . Step 5 Attach the Solar Panel ( part L ) on the top of Main Umbella ( part A ) . INSTALLATION AND ASSEMBLY/INSTALLATION ET ASSEMBLAGE Step 5 ASSEMBLY/ASSEMBLAGE Attach the Solar Panel ( part L ) on the top of Main Umbella ( part A ) . 1: Firmly, but carefully, connect the plug on the solar panel with the socket on the top of the umbrella. Do not pull on wires as doing so may permanently damage the connections.
INSTALLATION AND ASSEMBLY/INSTALLATION ET ASSEMBLAGE BATTERY REPLACEMENT Change the batteries in the solar panel every year or when the light output is diminished. • Only install new batteries of the same type in your product; (3) AA size Ni-MH 2000mAh rechargeable batteries. • Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may shorten the life of the batteries or cause batteries to leak. • Do not mix old and new batteries.
INSTALLATION AND ASSEMBLY/INSTALLATION ET ASSEMBLAGE BATTERY REPLACEMENT STEP 3: Place the solar panel upside down on soft, clean surface. Remove (3) screws on the bottom of the panel. STEP 4: Carefully lift the bottom panel, ensuring the wires remain intact. Gently remove the old batteries. Paying attention to the positive and negative terminals, insert new batteries. STEP 5: Carefully replace the bottom of the panel and align the screw holes. Secure the panel with the screws removed in step 3.
PRODUCT WARRANTY 1-YEAR LIMITED WARRANTY / 3-YEAR LIMITED WARRANTY ON BREEZ-TEX™ FABRIC This product, including aluminum ribs and pole, is warranted to the original purchaser to be free from defects in material or workmanship for a period of one (1) year from the date of the original retail purchase. Breez-Tex™ fabric is covered for 3 Years against defects in material or workmanship.
GARANTIE DU PRODUIT GARANTIE LIMITÉE DE 1 ANNÉE / GARANTIE LIMITÉE DE 3 ANS SUR LE TISSU BREEZ-TEX™ Ce produit, y compris les baleines en aluminium et le mât, est garanti à l’acheteur d’origine contre tout défaut de matériau ou de fabrication pendant une période de un (1) an à compter de la date d’achat au détail. Le tissu Breez-Tex™ est garanti à l’acheteur d’origine contre tout défaut de matériau ou de fabrication pendant une période de trois (3) ans à compter de la date d’achat au détail.