User Manual

5. Select Devices.

6. After the devices have been found, tap Add to add them to the

system.

i. View Device Settings page and ensure the device is shown.

iCamera KEEP is not triggering my CubeOne’s siren.

1. Ensure iCamera KEEP has been added to your account. In the

iSmartAlarm app, go to iCamera > Overview. Ensure your iCamera

is shown. If not, tap Add > iCamera KEEP and follow the setup

instructions.

2. Ensure the iCamera KEEP is linked to your CubeOne. In the

iSmartAlarm app, go to More > Link Devices > Ensure the switch

on your iCamera KEEP is turned on. If your iCamera KEEP is not

shown, ensure the iCamera KEEP is connected to the same local

network as the CubeOne.

3. Increase the iCamera KEEP’s sound and motion alert sensitivity

levels. In the iSmartAlarm app, go to iCamera > Settings. Increase

Sound Alert Sensitivity and Motion Alert Sensitivity to MID or

HIGH.

4. Ensure the CubeOne is set to Arm. If the CubeOne is set to a

custom mode ensure Motion Alert and Sound Alert are turned on

in that custom mode setting.

Unable to receive a live stream after disconnecting the network

cable for my iCamera (First Generation).

1. Ensure the network cable was disconnected before tapping Done

during the iCamera setup process. If the network cable was

disconnected after tapping Done,

i. Connect the iCamera directly to your router with the provided