User's Manual

2. Replace the button battery with same type - CR2032

LED statuses of contact sensors, motion sensors and remote tags

1. Device has been added to the network successfully: LED flashes red twice

2. Devices are working normal: LED is off

3. Sensor has been triggered: LED flashed red once

4. Low battery: flash 3 times continuously within 3 seconds

5. Communication error: LED stays solid red and white “breathing”

Sound confirmations

1. Siren stays on when the system is set off or the Siren button is clicked twice (in quick succession) on either App or Remote Tag

2. Arm/Home: 1 “bing” confirmation

3. Disarm: 2 “bing” confirmations

SETUP REQUIREMENTS

The iSmartAlarm Home Security System is designed to be used with the following iPhone models:

iPhone5

iPhone 4S

iPhone 4

iPhone 3GS

The iOS version of these devices should be 5.0 or higher.

SETUP PROCEDURES

DOWNLOAD THE FREE iSmartAlarm APP