User's Manual

iSmartAlarm is a Do-It-Yourself (DIY) product.
iSmartAlarm system does not come with traditional monitoring service.
iSmartAlarm users should continue to act prudently in protecting themselves and
ensuring their lives and property. Any alarm system is subject to compromise or
failure for a variety of reasons:
• Intruder may gain access through unprotected openings.
• Intruder may have the technical sophistication to bypass a sensor or whole system.
• Signals sent by CubeOne or devices may be blocked or reflected before being
received, and block can occur if metal objects are moved into the path of the signal.
• Motion sensors can only detect the intrusion within the designed ranges and
unobstructed areas.
• Malfunction of routers, limited services by wireless phone carriers, limited speed of
high-speed internet by ISP, limited service such as iMessage, push notification
provided by smartphone maker(s).
• The iSmartAlarm system, like any electrical system, is subject to component failures.
• Phone alert notification coverage currently includes continental US, Hawaii, and
Canada provinces excluding area code 907 (Alaska) and 867 (Canada Northeast and
Yukon). Additional areas will be added in the future. Please contact
[e-mail] for more details.
Note: Whenever turning power off to the CubeOne (either through power outage,
manually unplugging, or accidental disconnect), you should wait at least ten seconds
before plugging the CubeOne back in/powering on. This will allow the residual power
charge to cycle through.
CONTRAINDICATION
Use appropriate caution if you use this product in combination with medical
electronic devices such as:
(1) Medical electronic implants such as pacemakers.
(2) Electronic life support systems such as artificial heart/lungs.
2