EN iCamera KEEP Pro Quick Installation Guide This product is designed for DIY home monitoring using your Android or iOS smartphone.
Package Contents 1 iCamera KEEP Pro 1 Power Adapter 1 USB Cable 1 Mounting Bracket 1 Mounting Kit 1 Screwdriver 1 Quick Installation Guide Please read all instructions prior to beginning setup. How to add a new iCamera KEEP Pro This is your first iSmartAlarm product • Ensure your smartphone is connected to your home Wi-Fi network. • Download the iSmartAlarm app from the App Store or Google Play Store. • Sign up for an iSmartAlarm account and follow the app’s instructions to complete the setup.
2. For stone, brick and drywall, insert a wall anchor (included) into each hole. Do not use wall anchors if wall is not stone, brick, or drywall. Screw the longer screw into the existing holes or wall anchors. Leave each screw exposed 0.25 inches out from the wall. inchm) 5 2 . 0 .0 m (6 3. Use three short screws to secure the iCamera KEEP Pro to the bracket. 4. Plug in the power cable and secure it using the hook at the bottom of the bracket.
5. Place the bracket onto the two screws previously installed in wall. Warranty Information • This product comes with a 1-year warranty that cannot be excluded under your local consumer law. • You are entitled to a replacement or refund for a major failure of the product and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to major failure.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device complies with part 15 of the FCC Rules.
FR Guide d'installation rapide de la iCamera KEEP Pro Ce produit est conçu pour une surveillance résidentielle à installer vous-même et à utiliser avec votre téléphone intelligent Android ou iOS.
Contenu de l'emballage 1 iCamera KEEP Pro 1 adaptateur de courant 1 câble USB 1 support de montage 1 kit de montage 1 tournevis 1 guide d'installation rapide Veuillez lire toutes les instructions avant de commencer l'installation. Comment ajouter une nouvelle iCamera KEEP Pro Il s'agit de votre premier produit iSmartAlarm • Assurez-vous que votre téléphone intelligent est connecté à votre réseau Wi-Fi. • Téléchargez l'appli iSmartAlarm dans l'App Store ou le Google Play Store.
2. Pour la pierre, la brique et les cloisons sèches, insérez un ancrage mural (inclus) dans chaque trou. Ne pas utiliser d'ancrages muraux si les murs ne sont pas faits de pierre, de brique ou de cloison sèche. Vissez la vis la plus longue dans les trous existants ou les ancrages muraux. Laissez chaque vis exposée et sortir du mur de 6,0 mm. inchm) 5 2 . 0 .0 m (6 3. Utilisez trois vis courtes pour fixer la iCamera KEEP Pro au support de montage. 4.
5. Placez le support de montage sur les deux vis préalablement fixées sur le mur. Informations sur la garantie • Ce produit est accompagné d'une garantie de 1 an qui ne peut être réfutée en vertu des lois locales sur la consommation. • Vous avez droit au remplacement du produit ou au remboursement du coût en cas de défaillance majeure et à une compensation pour tout autre dommage ou perte raisonna blement prévisible.
Cet appareil est conforme aux normes RSS exemptes de licence d'Industrie Canada. Son fonctionnement est sujet aux deux conditions suivantes : (1) cet appareil ne doit pas générer d'interférences nuisibles, et (2) cet appareil doit accepter toute interférence, y compris les interférences pouvant entraîner un fonctionnement non désiré de l'appareil. Cet appareil est conforme à l'article 15 des règlementations de la FCC.