Product Overview

•
Individual pre-insulated rolls to
perfectly t every ductless mini-splits,
VRF, heat pumps and unitary
systems installation.
•
Available in 50ft, 82ft and 164ft with
1/2”, 3/4" and 1" insulation thickness.
•
All rolls are wrapped in clear lm for
added protection and marked by
the foot for maximum waste reduction.
ISO
Pre-Insulated Copper Line Sets
www.hmax.com
E-mail: [e-mail] Phone: (844) 500-HMAX
HMAX ©2019 5/19
•
Made in accordance with applicable regulations, with cleaned inside surfaces,
phosphorous deoxidized, high residual phosphorous, annealed in coils.
Crimped ends to keep the pipe clean until it has been installed.
•
Minimum Cu ≥ 99.90%
•
Phosphorous content = 0.015% ÷ 0.040%
•
Approved to ASTM B280
- T
ype ACR
•
Perfect for applications where high-pressure gases are used as refrigeration source.
COPPER PIPE
•
Low density closed cells polyethylene foam
•
CFC and HCFC damaging-ozone gas free
•
Made according to
ASTM C 1427-07
, type I (tubular), grade I (insulation material for use on
typical commercial system non-cross-linked)
•
Surface burning characteristics:
UL 94
, top rated for Surface Burning Characteristics –
UL 723
(Flame and Spread Index less than 25 and Smoke Development Index less than 50),
ASTM E84
(25/50) compliant and tested in accordance with
UL 746A
for Ignition Resistance.
INSULATION
•
External UV-retardant LDPE foil covering which adheres to a non-fammable base, melts flameless
b
elongs to self-extinguish Class.
.
•
Marked progressively every foot with product details (pipe and insulation diameters)
and production date & time.
•
Excellent resistance to water vapor diffusion and substantial reduction of moisture on the
outer surface of the pipe.
•
Additional protection to foam insulation from tearing during installation process.
• EXTERIOR INSULATION MUST BE PROTECTED FROM EXTERIOR HAZARDS
SHEATH
ASK FOR
ISO
ASTM B280
Tested in accordance with
UL 94, UL 723A, UL 746A
EXTERIOR INSULATION MUST BE PROTECTED FROM EXTERIOR HAZARDS
(ASHRAE 90.1-2013 & IECC- 2015)
EXTERIOR INSULATION MUST BE PROTECTED FROM EXTERIOR HAZARDS