IsoLynx II UWB Tracking Tag IL0401 - User Manual August 2019 IsoLynx Tracking Tag - 2AHCQ-IL0401 1
Table of Contents Introduction .......................................................................................................................................... 3 Regulatory Information for the United States ................................................................................. 3 FCC Notice (For US Customers): FCC ID: 2AHCQ-IL0401 Model: IL0401 .................... 3 Hardware & Specifications ...............................................................................................
Introduction The IsoLynx Tracking Tag (IL0401) is a small, battery-powered RFID device that produces ultrawideband pulses that are used to generate real-time location and movement data. IsoLynx tags are fixed to athletes, equipment, and other objects of interest and transmit UWB "pings" to reference nodes placed around the venue. Its small size and low power consumption make the IsoLynx tag an ideal UWB tracking apparatus for large venues and multiplayer sporting events.
Hardware & Specifications IsoLynx Tracking Tags The battery-powered tracking tags transmit UWB pings at up to 80Hz to allow for real-time location calculation. Tag pulse rates can be programmed for rates between 0.1Hz and 80Hz depending on their use or the number of other active tags in the venue. Tags remain in sleep mode when not in use and can be activated or deactivated remotely by using a master reference node.
Charging the IsoLynx Tags To ensure reliability and longevity, all tags should be fully charged before and after their use. The tags can be charged quickly using the charging dock and any compatible USB power station. Charging takes approximately 2-3 hours. 1. Secure the tag inside the charging dock so the metal pins on both devices are aligned. 2. Plug the charging dock into any compatible USB power source. 3. The tag’s LED displays Blue + Solid Red when actively charging.
Mounting on Uniform Shorts A second use for IsoLynx Flex Tags is collecting data from basketball games. The steps below detail how the tags should be attached to an athlete’s uniform shorts. Ideally, each clip will contain one tag. 1. Place the Flex Tag on top of the front-side of the clip. 2. Feed two plastic zip ties through the guide holes on the clip and over the Flex Tag. 3. Secure the tag in place, and pull the zip ties tight, removing any excess ends. 4.
IsoLynx Tag Hardware Specifications Main System Components Microcontroller: Onboard ARM Processor with BLE and NFC-A tag Accelerometer/Gyroscope/Magnetometer: Onboard 9-Axis Accelerometer/Gyroscope/Magnetometer Battery: 3.7V 300mAh - Rechargeable in Application Operating Voltage: 3.0V Operating Current: 5mA (nominal) Temperature Range: -40 - 85C RF Characteristics UWB IEEE802.15.