Manualshelf

User's Manual

ManualsBrandsISONAS ManualsElectronicsRFID Security access controller (LF 122kHz or HF 13.56MHz)
11121314151617181920
How to Install the ISONAS IP-Enabled Reader-controller 20
Generic Wiring, using External Power for the Lock: See Figure 7
1. The PowerNet itself is being powered by PoE.
2. Connect the positive side of the power supply to the pink (common) wire on
the ISONAS Reader.
3. For a Fail Safe lock, connect the gray (Normally Closed (NC)) wire on the
ISONAS Reader-controller to one lead of the electric lock. For a Fail Secure
lock use the Reader's tan (Normally Open (NO)) wire instead.
4. Wire the other lead of the lock to the Black wire on the power supply.
Figure 7