User's Manual

How to Install the ISONAS PureIP Reader-controller 12
A standard CAT5 cable is then run between the PoE source (Injector or switch) and the PureIP RC
which will be located right next to the door. The CAT5 cable can be up to 100 Meters (328 feet)
long.
Supplying 12 VDC to Door Components from the PoE powered PureIP RC
When the PureIP RC is powered by PoE, the reader can supply 0.6 amps @12 VDC power for
external components. This DC power is available via two pigtail wires.
The Red pigtail wire is typically used to control the door’s lock. The Red wire’s 12VDC output will be
activated /deactivated when the reader is operating the door’s lock. This connection has a built-in
current limiting feature, to prevent the lock from consuming too much electrical power.
The Orange pigtail wire provides a source of continuously-available 12 VDC power. You might use
this 12VDC source to power a PIR Motion Detector located at the door location.