User's Manual

How to Install the ISONAS PureIP Reader-controller 14
The different options require different configurations of the supporting equipment and /or building
wiring. The following chart and Figure 4 describes some of these power options.
Power Source
Switchable
Power
(Max)
Equipment at
the Door
Limiting Factor
Topology
Diagram
PoE (802.3af)
0.60 amps
(12VDC)
PureIP
PureIP’s available PoE
Output
A
PoE (802.3af)
0.55 amps
(12VDC)
PureIP
EDK
PureIP’s available PoE
Output
{minus}
the power required by
the EDK
B
DC Power Supply
12 VDC
3.0 amps
(12VDC)
PureIP
EDK
Rating of EDK’s lock
relay
(12VDC required by EDK’s
internal circuitry)
C
High-Powered PoE
(802.3at)
1.8 amps
(Approx)
(12VDC)
PureIP
EDK
PoE Splitter
Example PoE Splitter
PowerDsine
PD-AS-701/12
Rating of PoE Splitter
{minus}
power required to
operate PureIP & EDK
D
High-Powered PoE
(non-standard)
Example PoE Injector
PowerDsine PD-9501G
3.00 amps
(12VDC)
PureIP
EDK
PoE Splitter
Example PoE Splitter
PowerDsine
PD-AS-951/12-24
Rating of EDK’s lock
relay
E