Owners Manual

isoteksystems.comisoteksystems.com 1716 isoteksystems.comisoteksystems.com 1716
K.E.R.P.
Technical papers state that Kirchhoff’s circuit laws are two equalities that deal
with the current and potential difference (commonly known as voltage) in the
lumped element model of electrical circuits. They were first described in 1845
by German physicist Gustav Kirchhoff. This generalized the work of Georg
Ohm and preceded the work of James Clerk Maxwell. Widely used in electrical
engineering, they are also called Kirchhoff’s rules or simply Kirchhoff’s laws.
These laws can be applied in time and frequency domains and form the basis
for network analysis.
The guiding principles for IsoTek circuits are driven by Kirchhoff’s two current
laws, a simple analogy would be that for every litre of water placed into a water
distribution system we would expect to get the same out.
To put it another way, Kirchhoff and Gauss described how seemingly impossible
problems could be resolved by the concept of a town. If traffic flows on a circular
orbital road around the town there is no effect on the town. However, if traffic
enters the town, then there will be an effect on the town, and however many
cars that enter eventually have to leave. The structure of that town will have
either a positive or negative effect on that migration. In electronics this is also
true. We must totally respect the signal path as, whether one wishes it or not,
ultimately everything will be in the signal path to a greater or lesser degree.
SURGE
PROTECTION
SYSTEM LINK
INDEPENDENT
SOCKETS
WARRANTEE
YEAR
3
HIGH GRADE
COMPONENTS
SINE WAVE
CORRECTION
CONTINOUS
ABSOLUTE POWER
MULTIPLE
FILTER SYSTEM
SOLID OCC
COPPER AG
ADAPTIVE
GATING
K.E.R.P.
REMOVES
MAINS NOISE
SOLID OCC COPPER AG
As one would expect the internal wiring of any IsoTek product is of the highest
standard, ultra pure Ohno Continuous Cast copper solid core conductor strands
with silver-plating offer low resistance and high amperage. A Fluorinated
Ethylene Propylene (FEP) helix is wound around the conductor before an
extruded FEP dielectric protects the conductor and creates a Virtual Dielectric
of Air (VDA). This construction gives unrivalled performance and gives the
ultimate low resistance, high performance internal power delivery system.
IsoTek’s internal wiring synergizes with the range of IsoTek power cables. One
critical but overlooked area is maintaining commonality of design and material
properties though an audio wiring loom, be it signal carrying cables or your
power cable network.
SURGE
PROTECTION
SYSTEM LINK
INDEPENDENT
SOCKETS
WARRANTEE
YEAR
3
HIGH GRADE
COMPONENTS
SINE WAVE
CORRECTION
CONTINOUS
ABSOLUTE POWER
MULTIPLE
FILTER SYSTEM
SOLID OCC
COPPER AG
ADAPTIVE
GATING
K.E.R.P.
REMOVES
MAINS NOISE
SURGE
PROTECTION
SYSTEM LINK
INDEPENDENT
SOCKETS
WARRANTEE
YEAR
3
HIGH GRADE
COMPONENTS
SINE WAVE
CORRECTION
CONTINOUS
ABSOLUTE POWER
MULTIPLE
FILTER SYSTEM
SOLID OCC
COPPER AG
ADAPTIVE
GATING
K.E.R.P.
REMOVES
MAINS NOISE
HIGH GRADE COMPONENTS
Every IsoTek product uses the finest grade electrical components, many
custom made, using the highest quality metals and materials which are
specifically designed for purpose. Quality doesn’t stop at parts but also
extends into the PCB designs, which maintain high levels of amperage and
extraordinarily low levels of resistance, using up to eight times the general
standard of copper prior to pure silver plating.
Internal wiring also uses high purity coppers combined with silver plating,
with either Fluorinated Ethylene Propylene (FEP) dielectric or IsoTek’s Virtual
Dielectric of Air (VDA), where a FEP tube is wound around the conductor
before an extruded FEP dielectric protects this construction giving unrivalled
performance and the ultimate low resistance, high performance internal
power delivery system.
SURGE
PROTECTION
SYSTEM LINK
INDEPENDENT
SOCKETS
WARRANTEE
YEAR
3
HIGH GRADE
COMPONENTS
SINE WAVE
CORRECTION
CONTINOUS
ABSOLUTE POWER
MULTIPLE
FILTER SYSTEM
SOLID OCC
COPPER AG
ADAPTIVE
GATING
K.E.R.P.
REMOVES
MAINS NOISE
INDEPENDENT SOCKETS
IsoTek products feature outlet sockets that are totally independent from
each other; no two outlet sockets being directly connected. This is a critical
point for limiting or eliminating the cross contamination of Differential Mode
mains noise.
Each socket connects directly back to the PCB and is serviced by IsoTek’s
unique power cleaning technologies.
ADAPTIVE GATING
IsoTek’s unique Adaptive Gating system determines the appropriate level of
differential filtration for any connected load. The maximum level of overall
power filtration is achieved whilst respecting current requirements.
This system also eliminates Differential Mode noise cross contamination
between outlet sockets, as all connected devices will corrupt the supplied clean
power upon consumption throwing back Differential Mode noise. It is vital that
this noise isn’t allowed to affect another component’s performance.
SURGE
PROTECTION
SYSTEM LINK
INDEPENDENT
SOCKETS
WARRANTEE
YEAR
3
HIGH GRADE
COMPONENTS
SINE WAVE
CORRECTION
CONTINOUS
ABSOLUTE POWER
MULTIPLE
FILTER SYSTEM
SOLID OCC
COPPER AG
ADAPTIVE
GATING
K.E.R.P.
REMOVES
MAINS NOISE
SYSTEM LINK
Some IsoTek products contain a System Link outlet, this is designed to connect
multiple units together, maintaining a stared earth reference, and preserving
the need for multiple wall outlet sockets.
In the Mosaic One Series this is particularly useful for joining multiple units
together using our System Link cable.
SURGE
PROTECTION
SYSTEM LINK
INDEPENDENT
SOCKETS
WARRANTEE
YEAR
3
HIGH GRADE
COMPONENTS
SINE WAVE
CORRECTION
CONTINOUS
ABSOLUTE POWER
MULTIPLE
FILTER SYSTEM
SOLID OCC
COPPER AG
ADAPTIVE
GATING
K.E.R.P.
REMOVES
MAINS NOISE