Product Manual

User Manual
44
condensaon that may have formed, both inside the unit and in the external water
collecon tray. The natural defrosng me can vary from a few minutes to several
hours. In the winterme and when the refrigerator is shut o, the door should be le
slightly ajar for venlaon and all power disconnected.
Classic model venlaon:
Classic models are equipped with a handle with special stopper designed to leave the
door in posion for venlaon.
To set the door in the venlaon posion, use a knife or coin to release the stopper
(Fig. 5). Once the stopper has been released, hook the door in the venlaon
posion.
Elegance model venlaon:
Elegance models are equipped with a special door stopper system to set the door in
the venlaon posion inserted in the top of the refrigerator.
To set the door in venlaon posion, push the door stopper toward the right to the
venlaon posion “--> TO VENT” (Fig. 6).
3.1 Low voltage protecon
In order to prevent excessive baery depleon, a protecon device shuts o the
compressor in case of insucient voltage and turns it back on when the voltage in
the system increases aer the baeries have been charged.
System Voltage Shut-down
Voltage
Minimum Operang
Voltage
12V 9.6 (10.4) V 10.9 (11.7) V
24V 21.3 (22.8) V 22.7 (24.2) V
If the bridge is removed between C and P, the values indicated in the parentheses are
valid.
WARNINGS: Before switching on the unit, always make sure that the
baeries are in opmal condion.