User Manual

REAR PANEL
1. CHANNEL 1 INPUT JACK
This ¼ inch mono jack provides the high impedance input for connection to your guitar.
2. CHANNEL 1 OUTPUT JACK
This ¼ inch mono jack provides the unbalanced output signal for channel 1.
3. CHANNEL 2 INPUT JACK
This ¼ inch mono jack provides a balanced input for the audio path channel 2.
4. CHANNEL 2 OUTPUT JACK
This ¼ inch mono jack provides the unbalanced output signal for channel 2.
5. GROUND LIFT SWITCHES*
All switches eliminate the ground connection for the illustrated channel input or output.
6. POWER INPUT JACK
This jack connector accepts power from the 9V AC adaptor supplied with the unit.
DECIMATOR PRORACK G OPERATION
*NOTE: Ground Lift switches allow the user to lift the ground between the output signal of channel
one of the ProRack G and the input of the selected amplifier, and between each of channel two’s
input and output signals that connect to an amplifiers effects loop. If a ground loop hum occurs it is
recommended to disconnect or ground lift all but one connection. You may want to experiment with
the best grounding option for the lowest noise performance.