INTRODUCTION Congratulations on your purchase of the Stealth Power Amplifier. The Stealth Power Amplifier was designed to provide a new level of power amplifier performance. The Stealth Power Amplifier is based on both ISP Technologies patented D-CAT (Dynamic Current Amplifier Technology) and the new Dynamic Adaptive Amplifier Technology which is covered under patents pending.
STEALTH POWER AMPLIFIER FRONT PANEL 1. Master Level Control Controls the level of both Channel 1 and Channel 2 in Stereo Mode and Bridge Mode. 2. POWER ON LED 1. Channel 2 Output Speaker Connection Channel 2 Speaker connection, connect ¼ speaker cord to Channel 2 speaker. Use 4Ω, 8Ω or 16Ω loads. NOTE: Mono Bridge Output is dissabled when Channel ouptut is used. 2 Channel 1 Output Speaker Connection Channel 1 Speaker connection, connect ¼ speaker cord to Channel 1 speaker. Use 4Ω, 8Ω or 16Ω loads. 3.
STEALTH POWER AMPLIFIER TECHNOLOGY The Stealth Power Amplifier is based on a new Power Amplifier Technology developed by ISP Technologies. The Stealth uses ISP Technologies patented “Dynamic Current Amplifier Technology” (D-CAT) controlled by a new patent pending “Adaptive Dynamic Amplifier Technology” which provides a novel Class H power amplifier topology with improved efficiency and Dynamic Voltage Multiplication.
STEALTH POWER AMPLIFIER STEREO CONNECTIONS
STEALTH POWER AMPLIFIER MONO BRIDGED CONNECTIONS STEALTH SPECIFICATIONS
INPUT IMPEDANCE 500k Stereo / 250k Mono Bridged OUTPUT POWER MONO 4Ω=75WRMS@1% THD/ 90WRMS@10% 8Ω=45WRMS@1% THD / 60WRMS@10% OUTPUT POWER BRIDGED 8Ω=140WRMS@1% THD / 175WRMS@10% 16Ω=80WRMS@1% THD/ 106WRMS@ 10% INPUT SENSITIVITY / MAX OUTPUT -3dBu / .56vrms MAXIMUM INPUT SIGNAL +17dBu VOLTAGE GAIN 30dB Stereo / 36dB Mono Bridged NOISE FLOOR -75dBu DYNAMIC RANGE 102db A WTD DISTORTION @10dBu output=.02% Full Output=.1% FREQUENCY RESPONSE 20Hz – 20KHz = +0 / -.
WARRANTY AND SERVICE The Internal Circuitry is fully guaranteed to be free of defects under normal use and service for a period of three years from the date of purchase. Any damage resulting from the misuse or the failure to follow the precautions and instructions will void the warranty. In the event that the unit needs to be repaired, please return the unit to ISP Technologies directly.