WATER DISPENSER i Spring DDS Free-standing Dispenser with Built-in 4-Stage Filtration ETT (ED Ll —_V Installation Instructions & User Manual Ver. 06/2022 Ez DD | Spring: ee Copyright ©2005-2022 PRINTING WATER SYSTEMS, LLC All nights reserved.
We stand behind our products Since 2005, 1 Spring has been dedicated to providing high-quality drinking water fo families across the United States. We: provide various residential faucets and water filtration systems that purify your water in everyday life and deliver pure, healthy, and tasty water to you and your family.
Prior to Installation Rend his instruction manual carefully prior to installation. Keep this manual readily available for future reference. Table of Contents Lister Information Product Operation & Specifications . JEL te eT OOS. System Parts Weatherization eC eee Using the System Control Panel LED Alight Functions oi Essen Care and Cleaning . Troubleshooting Warranty Warranty and Registration 00 0 ee eee.
User Information The user pst adhere to the installation specifications described mm tus Product Installation and Operation Mammal (hereinafter referred foams the instruction manual®). Spring is not responsible for damage, loss, or injury insulting fom neglect mu proper maintenance, or unauthorized modification of the unit. The unit should be placed only on fat surfaces. Do not mouton a wall. Vise only. authorized i Spring parts, Using authorized or aftermarket: components will void the product warranty.
Product Operation & Specifications Though recasting performed node standard laboratory conditions, the actual performance of the system may vary based on Local water conditions and quality. SPECIFICATIONS Model DSS i . 1E8in x Mn x 41.7 in Dimensions 35.8 cm x 106 om Water Tunnel Temp. HO. 100 OF Heating Trope (approx }. Hoop fag oC Cooling Temp (approx). 41-48 FI 39°C Heating Power Consumption S00W Cooling Power Supplication 85 W Filters Stage Mabel Purpose Life FEDS: High-capacity polypropylene filter. 3.
A Warning ® Never put anything flammable close to the dispenser. B This water dispenser is designed for moor applications only. a Electric shock hazard: Do not overload sockets or extension cords, # Dio not marriage the refrigeration cooling system &® Do not touch the plug with wet hands to prevent electric shock. we Always disconnect the power cord before attempting to clean overborne the dispenser. 8 ELECTRICAL REQUIREMENTS: AIS Volt: 60 Fe AC only 15 amperes fused, growled electrical supply is required.
Ey System Parts Identification Hot Water Push Button (with Child Safety Lock) Room Temperature Water Push Button Cold Water Push Button LED (Ready-to-Dispense Indicator Lights) e Reds Hot Water s Yellow = Water Levels Blue = Cold Water Door Switch (Controls System Operation) Removable Drip Tray & Grill Filters 1" stage — 4” stage: left — right) Inline Ball Valve (SABIK) Lower Front Door NOTE: Door must always be closed for proper operation . Leak-detest Sensor Ci Hot Water Switch (red) .
Control Panel LED Light Functions —aL I Off Flashing Solid The beating system off Hot water has Red LED Light . Hot water is heating reached optimum (Hot Water) poach he hot tare 3 ig temperate, water (red) switch on the ready to dispense. panel (page 6 #11). Yellow LED he tare levels inside Water levels inside Light © OSCILLATE ALE SOW. | the reservoir are . Che the water insult od (Water Level} and the valves.
Operation {1} Airsick Connect Instruction HOW TO CONNECT #2 least 172% in INSERT LOCK © / @ HOW TO DISCONNECT PRESS REMOVE highly recommended that vou watch the video "Hew to Connect and Disconnect Quick Connect Fittings | DIY Installation’ on YouTube Cut the tubing end squarely seine a unlit knife scissors, Insert the lubing into the quick connect fitting Oust least U2”, You will'need to wiggle the tube and apply additional pressure fo create a seal.
de The included bushing can be threaded on either @ SS ©) side of the Feed Water Adapter to fit the configuration of bath 38" COMP and V2" NPT. £3) Installation FRE ig Bin Fen, x w= id Step 1. Choose a suitable location for the sateen It pst be placed on a flat surface. Step 2. Install the Removable Drip Tray & Grill at the front of the feminism. Step 3. Otherwise 1/4" tube into the 1/4" water inlet {page 6 #16) at the back of the system, Sep d.
{4} Dispensing Cold Water This Water Dispenser left the factory with the cold water tempering control default setting for Energy Star compliance. This setting will deliver cold water temperatures between 46°F). The temperature’ Can be adjusted. Using o screwdriver, torn the dial clockwise between Her {cold and i oe (Calder) anti tie desired preoperative is reached. {5} Dispensing Hot Water AE £25¢ Fib Warning: Hot water temperatures can reach 94°CI201 F and produce severe scalding.
Care and Cleaning # Cleaning the Outside of the Water Dispenser um Cleaning the Drip Tray & Draining the Reservoirs Page 1] www interconnect | (678) 261-7611 | supportini23fillereon
#® Changing the Fillers Step 1. Sep 2. Step 3. Step 4. Step 5. Step 6. Step 7. Seep 8. Open the Lower Front Door. (page 6 #9). Turn off the Inline Ball Valve {SABIK) {page 6 #8). Drain the Reservoirs. (page 11) Unscrew the filters) to be replaced. (turn left) Screw the corresponding replacement filter(s) info each slot. (fur right) Turn on the Inline Ball Valve (SABIK) {page 6 #8). Case the Lower Front Door (page 6 #9).
Troubleshooting PROBLEM POSSIBLE CAUSE SUGGESTED SOLUTION The water The drain cap and silicone seal are | Ensure seal is secure in drain plug dispenser is not secure. and tighten drain cap (page 6 #13}. leaking Water is not hot The unit is no plugged. Plug:the power cord (page 6 #14} into or cold enough the outlet. “The hot water switch at the unit's | Activate hot water switch (page 6 panel is in the OFF position. #11) to the ON position. Indicator lights are not lit.
Warranty Registration To register your product Tor the warranty, visit our website ot 123ilter.com and go to the Warranty” tab. We provide a 30-day money back guarantee, a T5ygar manufacturer warranty, and lifetime tech support for all of our products. However, we do not have the order information from websites other than 123Filter.com (Amazon, Home Dept, etc), so please be sure to fill iu that information upon registration of your system.
Atlanta, GA USA iSpringFilter.com For questions, comments, or technicality support, please contact us at: support@ 1 23 Filter com (678) 261-7611 Monday-Friday 8:30 aan. 5:30 pm.
