Installation Guide

Step2:InstallingtheRO
2.1 Ifyourkitchensinkdoesnothaveanexisting½”faucethole,youwillhavetodrillone.(RefertoHowto
drillaHoleonSinkorCountertop  ).Wipecleananddrythearea.
2.2 Slipthefrontplateonthefaucetstem,followedbytherubberwasher.Insertthefaucetstemintotheholeon
thecountertop.Underthesink,sliponthebackrubberwasher,andtightenthenutwiththeplasticwing.
2.3 Screwthetubingadapterontothefaucetstem.InserttheBLUEtubingabout1/2inchintothePushinfitting.



















Step3:
InstallingtheDrainSaddle
3.1 Chooseaspotonthedrainpipethatisconvenient for
installingthedrainsaddleandtubing.Ahorizontalpipeisrecommendedtominimizethe
drippingsound.
3.2 Drilla1/4”holeinthedrainpipe,andpastetheblackstickypadaroundthehole.
3.3 CuttheBLACKtubingendtomakea45degreeangle.Sliptheplasticnutandfrontplateon
thetubing.Insertthetubingintothe1/4”holeinthedrainpipe,installthebackplate,and
tightenthetwoscrewswithhexnutswhilethetubingremainsinthehole.
3.4 TightenthenutontheDrainSaddlebyhand.Pullthetubinglightlytomakesureitissecure.
 
Page9www.123filter.com|(678)2617611|[e-mail] 