Instructions / Assembly

www.123filter.com | [phone] [e-mail] page 2
Installation of Whole House Filtration System (1-stage, 2-stage, or 3-stage)
USE A LICENSED PLUMBER TO INSTAL THIS PRODUCT
Tools required
Safety glasses Hacksaw
Towels Soldering iron or torch
Flat head screwdriver Power drill
Medium Crescent wrench Teflon tape
Monkey wrench
Parts required (not included)
● (2) shut off valves
● (2) hex nipples or pipe nipples
● (2) pipe unions pressure regulator (as needed)
● (1) ground jumper cable
● Optional: pressure gauge(s), bypass valve(s), pipe hangers
Preliminary Notes
● This installation guide provides a step by step, start to finish procedure for installing your
ISpring water filter. .
● All steps provided herein are for typical installations only. Your application may be different.