WSP-GR USER MANUALVer.09/2018 Copyright ©2005-2018 ISPRING WATER SYSTEMS, LLC. All rights reserved.
OVERVIEW iSpring WSP-GR Reusable Spin-down Sediment Water Filter with Scrapper and 360°Rotating Head This central water purification pre-filter is mainly used to filter out particulate impurities, sediment, rust, floating objects and other pollutants in the water. It plays an active role in protecting terminal equipment and appliances such as downstream pipelines, water purifiers, water heaters, wall-hung boilers, washing machines, and showerheads.
PRODUCT FEATURES • Large water capacity, using food grade stainless steel precision mesh membrane; • Patented integrated flushing technology, which can effectively remove all kinds of impurities trapped by the filter for more effective cleaning and washing without the need to remove the filter; • Core components made of materials that are strong in pressure resistance, safe and reliable; • Special explosion-proof transparent housing provides clear visibility and is intuitive and convenient to use; •
As part of our commitment to providing complete and reliable products and service, please contact us immediately if you have any questions. HOW TO INSTALL To suit different plumbing sizes, the unit comes with two types of threads on both ends: 1 inch MNPT and ¾ inch FNPT. Please pay attention to the flow direction indicated by the arrow. • Close the main inlet valve and drain the remaining water from the pipe.
• Make sure to apply Teflon tape evenly • When tightening the hex nut with a wrench, make sure that other parts are not turning with it. • After the filteris installed,carefully observe whether there is water leakage at the joints. PRODUCT INSTRUCTIONS • After installation, open the inlet water main valve to perform a flush. • Before flushing, ensure that there is a reliable drainage system. You can also flush the drain water in to a suitable container.
INSTALLING THE SCRAPING AND THE FILTER ASSEMBLY • When inserting the scraping assembly into the filter housing, the quadrilateral hole with rounded corners on the scraping assembly should be inserted into the hexagonal hole on the bottom of the filter housing and inserted into the bottom. • When installing the filter assembly, note that the four bumps on the filter assembly inside the scraper assembly should be placed on the four grooves on the upper filter housing and inserted into the bottom.
CUSTOMER SATISFACTION AND WARRANTY REGISTRATION To register your product for the warranty, please visit our website at 123filter.com and go to the “Warranty Registration” tab. We provide a 30-day money back guarantee, a 1-year manufacturer warranty, and lifetime tech support for all of our products. However, we do not have the order information from websites other than 123Filter.com (Amazon, Home Depot, etc.), so please be sure to fill in that information upon registration of your system.
iSpring Water Systems, L.L.C.
