WSP-ARB/ WSP-B Series USER MANUAL Ver.07/2020 Copyright ©2005-2020 ISPRING WATER SYSTEMS, LLC. All rights reserved.
OVERVIEW iSpring WSP-ARB/WSP-B Reusable Spin-down Sediment Water Filter with Scraper and Auto Flushing Module The iSpring WSP-ARB/WSP-B filters out particulate, sediment, rust, floating objects and other pollutants in water. It should be installed as a central water purification pre-filter to protect terminal equipment and appliances such as downstream pipelines, water purifiers, water heaters, wall-hung boilers, washing machines, and showerheads. The iSpring WSP-ARB/WSP-B is flushable and reusable.
PRODUCT FEATURES • System is constructed with, 316L food grade stainless steel precision filter mesh; • Integrated auto flushing module with scraper that can trap all kinds of sediments without needing to remove the filter; • Core components are made of materials that are pressure resistant; • Explosion-proof transparent housing provides clear visibility and is intuitive and convenient to use; • Cleaning features conveniently remove contaminant buildup from the filter housing with a just a few turn
PARTS IDENTIFICATION HOW TO INSTALL To fit different plumbing sizes, the unit comes with two types of threads on both ends: 1 inch MNPT, 3/4” FNPT, and 3/4” inch Push-Fit Please pay attention to the flow direction indicated by the arrow. • Close the main inlet valve and drain the remaining water from the pipe. • When installing, make sure that the direction of water flow marked on the valve body aligns with the direction of water flow in the pipeline.
• PPR pipeline installation requires firm welding with special welding equipment. • This product should not be installed outdoors. It should be located away from direct sunlight, heat sources, fuel oils, and chemicals. • Make sure to apply plumber’s tape evenly. • When tightening the hex nut with a wrench, make sure that other parts are not turning with it. • After the filter is installed, check for any water leakage at the joints.
• To remove the filter assembly, unscrew the filter housing counterclockwise using the included wrench. • Remove the filter assembly and clean the filter mesh. Note: You do not need to remove the scraping assembly if you’re only cleaning the filter assembly. INSTALLING THE SCRAPING AND FILTER ASSEMBLIES • To insert the scraping assembly into the filter housing, place the quadrilateral hole with rounded corners into the hexagonal hole on the bottom of the filter housing, and insert it into the bottom.
To register your product for the warranty, please visit our website at 123filter.com and go to the “Warranty Registration” tab. We provide a 30-day money back guarantee, a 1-year manufacturer warranty, and lifetime tech support for all of our products. If you ordered from a website other than 123Filter.com (Amazon, Home Depot, etc.), please be sure to fill in your order information upon registration of your system.
iSpring Water Systems, L.L.C.
