Operator's Manual

6.1 Ammunition

Use only high quality commercially manufactured ammunition in good

condition of the appropriate gauge and chamber length. The gauge and

chamber length of your shotgun is marked on the left side of body. The

TS12 Shotgun is chambered for 12 GA 3”, which will also fire 12 GA 2

¾” ammunition. Use only SAAMI specification ammunition.

For optimum performance of this shotgun, use shells with a minimum

velocity of 1200 fps and minimum weight of 1 1/8 oz. The weapon can

also be tested with the gas setting on “H” (heavy) or “L” (light) for

function based on the velocity of the load you are using. For reliable

functioning with 2 ¾ shot shells, use the “L” setting. For higher velocity

3 inch magnum rounds, use the “H” setting. If the heavier rounds fail to

function with the “H” setting, try the “L” setting with the same

ammunition. Short and mini shot shells will not function.

Not all ammunition produces the same result. IWI US, Inc. recommends

that once you find a brand which functions best, keep using it.

IWI US, Inc. does not recommend using hand loads reloads,

remanufactured ammunition, or foreign or military surplus ammunition of

unknown or questionable quality. The use of this ammunition will void

the IWI US, Inc. warranty, and may be dangerous, possibly causing death

or serious injury if the ammunition is not made to the proper

specifications.