Operator's Manual

General Description

8.2.3 Loading the Shotgun – Alternative Method

1. Ensure that the safety lever is in the SAFE position (see

Safety Lever and its Positions on p.21).

2. Point the muzzle in a safe direction.

3. Verify that the shotgun is unloaded.

4. Engage the carrier stop lever and charge the bolt to the rear.

The bolt should lock to the rear because the carrier stop lever

was engaged.

5. Drop a shot shell through the open ejection port (with the

shell oriented properly) then press the bolt release button.

The round will load into the chamber.

6. Load each magazine tube as described above to completely

load the TS12 Shotgun.

THE SHOTGUN IS NOW LOADED

WITH THE SAFETY LEVER ON “SAFE”.