Operator's Manual

41
General Description
10 Secondary
Disassembly/Assembly
This section provides disassembly/assembly procedures for the
following:
Shotgun Assembly
Page
Carrier Group Mechanism
41
Bolt Assembly
44
Choke Tubes
45
10.1.1 Carrier Group Mechanism
WARNING! The Carrier Group Mechanism
disassembly can be performed ONLY by a certified
armorer!
To disassemble the carrier group assembly from the receiver, first
remove the receiver assembly from the shotgun as shown in the Strip
Field - Disassembly/Assembly Instructions on p.32.
Tools required: a 3mm punch and small hammer.