EAGE1040TG-PM EAGE540TG-PM EAGE8402TG-ES EAGE4402TG-ES
■ Content page 1 2 2.5” HDD EAGE8402TG-ES & EAGE4402TG-ES A. Product Overview -Front B. Product Overview -Rear 3 C. Switching Power Supply Voltage D. Install 2.5” Hard Drive E. Power ON/OFF System F. Locking and Unlocking Door 4 G. Connect to Your Computer 5 H. iStarUSAcare 6 7 3.5” HDD EAGE1040TG-PM & EAGE540TG-PM A. Product Overview -Front B. Product Overview -Rear 8 C. Switching Power Supply Voltage EAGE8402TG-ES D. Install 3.5” Hard Drive EAGE4402TG-ES E. Power ON/OFF System F.
A B Product Overview - Front 1 2 Product Overview - Rear 4 7 5 1 3 2 8 7 6 8 7 8 3 6 4 EAGE8402TG-ES EAGE8402TG-ES EAGE4402TG-ES 5 EAGE4402TG-ES 1 POWER LED 4 POWER SWITCH 2 HDD ON/OFF SWITCH & LED 5 AC INLET 3 KEY LOCK 6 110V/220V SWTICH 7 eSATA CONNECTOR x4 8 60mm FAN LED Behavior POWER LED Color Status Solid Green System Power ON Off System Power OFF HDD LED Color Status Solid Blue HDD Power ON Blinking Blue Drives Working (Read/Write) Off HDD Power OFF
C E Switching Power Supply Voltage Powering ON/OFF System *CAUTION: Ensure the power supply voltage selector switch is correctly set for your region before use Wrong voltage setting will cause damages on devices 1 1. Make sure power switch in the back of chassis is in ON position 2 115 3 230 1. Switch to right voltage setting before turning on power switch D 2. Tighten two hand screws to secure HDD tray 3. Push individual power buttons to power on each hard drive 4.
G G Connect to Your Computer by eSATA Connect to Your Computer by miniSAS eSATA Cable 4 eSATA to SFF-8088 cable eSATA Cable EAGE8402TG-ES EAGE8402TG-ES Eight eSATA cables are required. Two SFF-8088 to 4 eSATA cables are required. one for disk 1~4, second for disk 5~8. eSATA Cable 4 eSATA to SFF-8088 cable eSATA Cable EAGE4402TG-ES EAGE4402TG-ES Four eSATA cables are required. One SFF-8088 to 4 eSATA cable is required.
H iStarUSAcare We will help you navigate our website to find the information that you need. Go to www.istarusa.com , and click on live chat bubble above the Search Bar. Our technicians are standing by to take your questions. Visit http://istarusa.com/support/ , and you will receive a technical support ticket to help track your requests from the beginning to the end. Or you can contact us @888-989-1189 Copyright: Copyright © 2014 by iStarUSA Global, all rights reserved.
■ Content page 6 7 3.5” HDD EAGE1040TG-PM & EAGE540TG-PM A. Product Overview -Front B. Product Overview -Rear 8 C. Switching Power Supply Voltage D. Install 3.5” Hard Drive E. Power ON/OFF System F. Locking and Unlocking Door 9 G. Connect to Your Computer H.
A B Product Overview - Front Product Overview - Rear 1 4 2 3 1 4 2 4 3 5 5 5 6 7 EAGE1040TG-PM EAGE540TG-PM 1 POWER LED 2 HDD ON/OFF SWITCH & LED 3 KEY LOCK EAGE1040TG-PM LED Behavior POWER LED Status Color Solid Green System Power ON Off System Power OFF HDD LED 6 7 8 8 EAGE540TG-PM 4 120mm FAN 5 eSATA CONNECTOR 6 POWER SWITCH 7 AC INLET 8 110V/220V SWTICH Status Color Solid Blue HDD Power ON Blinking Blue Drives Working (Read/Write) Off HDD Power OFF *pl
C E Switching Power Supply Voltage Powering ON/OFF System *CAUTION: Ensure the power supply voltage selector switch is correctly set for your region before use Wrong voltage setting will cause damages on devices 1 1. Make sure power switch in the back of chassis is in ON position 2 3 115 230 1. Switch to right voltage setting before turning on power switch D 2. Tighten two hand screws to secure HDD tray 3. Push individual power buttons to power on each hard drive 4.
G H Connect to Your Computer iStarUSAcare We will help you navigate our website to find the information that you need. Go to www.istarusa.com , and click on live chat bubble above the Search Bar. eSATA Cable Our technicians are standing by to take your questions. Visit http://istarusa.com/support/ , and you will receive a technical support ticket to help track your requests from the beginning to the end. Or you can contact us @888-989-1189 eSATA Cable EAGE1040TG-PM Two eSATA cables are required.
