Installation manual

TC-Rail Series
Installation
(Pull the center slide all the way out until it reaches the end)
You will see a locking clip at the end point of the center slide.
Push it down and unlock the center slide.
Now put the center slide right next to the rackmount chassis. You should be able to find
screw holdes on both sides of chassis. Holes are used for mounting the center slide.
Later, the center slide will be use for attaching the sliding rail.
Secure outter rail to L bracket with
screws and nuts.
Aline front outter rail to the indent of L bracket between Point A & B.
B
Reattach inner rail back to center rail
Repeat previous steps to secure
sliding rails on both sides.