Owner manual

#13
www.istorage-uk.com
iStorage datAshur Personal
®
Manual – v 31
personal
To display the rmware revision do the following:
• Unlock the drive in admin mode
• Double press and hold the KEY Button as if changing the Admin PIN
• Enter ‘R’ + ‘V’ followed by the KEY Button (e.g. 7 - 8 - KEY)
• The RED LED will blink according to the most-signicant digit of revision.
• The GREEN LED will blink according to the least-signicant digit.
For example, if the revision number is ‘13’, all indicators will turn off momentarily followed
by a 1 (one) blink from the RED LED followed by 3 (three) blinks from the GREEN LED.
The drive will then start double blinking to indicate that it is unlocked in admin mode.
11. Administrator Privilege Commands - continued
iv. Show security controller rmware version: