User's Manual

#14

iStorage datAshur

BT Personal User Manual – v 1.5

www.istorage-uk.com

19. Setting datAshur BT as Read-Only

Your datAshur BT can be set as Read-Only (Write-Protected).

To set as Read-Only, ﬁrst unlock your datAshur BT as described in section 7. Once the Drive is unlocked

showing a GREEN padlock (

) on the App and solid Blue ( ) LED on your datAshur BT, proceed with the following steps.

Setting datAshur BT as Read-Only App Drive LED

1. Tap on the GREEN padlock.

2. Tap the Read-Only switch to ON and

then tap LOCK.

Note: The Drive will lock. Next time the Drive is

unlocked access will be restricted to Read-Only.

3. To disable (turn off) Read-Only tap the

switch to Off and tap LOCK.

Note: The Drive will lock. Next time the Drive is

unlocked access will be back to Read/Write.

20. How to enable Remote Wipe

To prevent leaving critical data vulnerable should your datAshur BT Personal be lost or stolen, remote wipe safeguards

against this by allowing you to remotely wipe (delete) the encryption key, all data and credentials.

To enable Remote Wipe, ﬁrst unlock your datAshur BT as described in section 7. Once the Drive is unlocked

showing a GREEN padlock ( ) on the App and solid Blue ( ) LED on your datAshur BT, proceed with the following steps.

How to enable Remote Wipe App Drive LED

1. Tap on the GREEN padlock.

2. Tap the Remote Wipe switch to ON and

then tap ENABLE.

3. To disable (turn off) Remote Wipe tap the

switch Off and tap OK.

Caution: Do not remove (delete) the Drive name from the list of paired drives on the datAshur BT Personal App or the

ability to wipe remotely (remote kill) will be no longer possible.