Installation Instructions

iSurpass Technology
Address: Room908, A Building, Zhantao Technology Buildling, Minzhi Blvd, Longhua District, Shenzhen, China
www.isurpasstech.com
Installation Diagram:
Ⅱ. Reset
1. Power off the gateway;
2. Power on the gateway;
3. User will see gateway LED display like this：
S/N LED status
1). Green LED flash 1 time, slow
2). Yellow LED flash 1 time, slow, at this moment,press and hold on” button” quickly until GREEN LED flash quickly
3). Green LED flash quickly Release the button, then press and hold on again until RED LED flash quickly
4). Red LED flash quickly Release the button, then press and hold on again until YELLOW LED flash quickly
5). Yellow LED flash quickly Release the button, and then press 3times quickly,
then yellow LED flash continuously about 10s
6). Yellow LED flash continuously about 10s , reset completed
7). Green LED flash quickly Start a new round of network configuration
4. Power off
Remark:
1. Gateway Reset will be completed after Step 7). After that, it will start a new round of network configuration automatically.
2. Gateway Reset clear all the devices under this gateway, but remains the network connection.