Workshop Manual

1A–76
HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
I
Pressing the intake switch permits manual control of air intake and/
or recirculation.
I
n
t
a
k
e
S
w
i
t
c
h
If the intake switch is pressed during manual DEF or D/F, the intake
switch LED briefly turns on. However, outside air intake (FRESH)
continues.
T
e
m
p
e
r
a
t
u
r
e
C
o
n
t
r
o
l
S
w
i
t
c
h
The display panel temperature setting can be set from 18°C (65°F)
to 32°C (90°F).
Pressing and immediately releasing the Y switch increases the
temperature setting in -17°C (1°F) increments. If the switch is
pressed and held, the temperature setting increases rapidly.
Pressing and immediately releasing the B switch decreases the
temperature setting in -17°C (1°F) decrements. If the switch is
pressed and held, the temperature setting decreases rapidly.
When the temperature setting is at 32°C (90°F), the unit is set to
maximum heat mode.
When the temperature setting is at 18°C (65°F), the unit is set to
maximum cooling mode.