Workshop Manual

6E–289
6VE1 3.5L ENGINE DRIVEABILITY AND EMISSIONS
DTC P0353 – Ignition 3 Control Circuit (Cont'd)
Step NoYesValue(s)Action
11 Check for an open ignition control circuit 3.
Was the ignition control circuit open?
— Go to Step 12 Go to Step 13
12 Repair the open ignition control circuit.
Is the action complete?
— Verify repair —
13 Replace the PCM.
IMPORTANT: The replacement PCM must be
programmed. Refer to
On-Vehicle Service in
Powertrain Control Module and Sensors for
procedures.
And also refer to latest Service Bulletin.
Check to see if the Latest software is released or not.
And then Down Load the LATEST PROGRAMMED
SOFTWARE to the replacement PCM.
Is the action complete?
— Verify repair —