Workshop Manual

HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
1A–119
Power Transistor
1.Remove the power transistor connector (C–34) from
the evaporator assembly.
2.Check the conduction between the power transistor
side terminals.
C01R200006
MAX HI Relay
1.Remove the MAX – HI relay connector (C–35) from
the blower assembly.
2.Check the conduction between the MAX – HI relay
side terminals.
C01R200011
In Car Sensor
1.Turn on the ignition switch (the engine is started).
Start the air conditioner in “Auto”.
2.Make sure that the in car sensor suctions cigarette
smokes and such.
In Car Sensor
1.Dismount the in car sensor from the automatic
heater/air conditioner control unit. Connect (+) end
and (–) end of the battery to the aspirator motor side
terminals No.I17–1 and No.I17–2, respectively, then
check if the motor runs normally.
C01R200010