Workshop Manual

HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
1A–121
On-Vehicle Service
Power Transistor
874R200014
Legend
(1) Glove Box
(2) MAX HI Relay
(3) Power Transistor Connector
(4) Power Transistor
Removal
1.Remove the glove box.
2.Remove the MAX–HI relay.
3.Disconnect the power transistor connector.
4.Remove the power transistor.
Installation
To install, follow the removal step in the reverse order.
Automatic Heater/Air Conditioner
Control Unit
865R200007
Legend
(1) Display
(2) Audio & Switch Assembly
(3) Automatic Air Conditioner Control Unit
(4) Knee Pad (RH)
(5) Center Cluster
(6) Center Cluster Upper
(7) Knee Pad (LH)
Removal
1.Disconnect the battery ground cable.
2.Remove the knee pad (R/LH).
3.Remove the center cluster upper.
4.Remove the center cluster.
B Refer to
Instrument Panel Assembly in Body
Stractur section.
5.Disconnnect the six connectors.
6.Remove the automatic air conditioner control unit.
Installation
To install, follow the removal step in the reverse order.