Workshop Manual

1A–124
HEATING, VENTILATION AND AIR CONDITIONING (HVAC)
Mode Actuator
840R200005
Legend
(1) Driver Knee Bolster Assembly
(2) Instrument Panel Driver Lower Cover
Assembly
(3) Actuator Rod
(4) Mode Actuator
Removal
1.Disconnect the battery ground cable.
2.Remove the instrument panel driver lower cover
assembly.
3.Remove the driver knee bolster assembly.
B Refer to the Instrument Panel Assembly in Body
Structure section.
4.Remove the actuator rod.
5.Remove the mode actuator.
Installation
To install, follow the remove step in the reverse order.
Mix Actuator
840R200006
Legend
(1) Center Cluster Upper
(2) Center Cluster
(3) Knee Pad (RH)
(4) Actuator Rod
(5) Mix Actuator
(6) Knee Pad (LH)
(7) Audio & Switch Assembly
Removal
1.Disconnect the battery ground cable.
2.Remove the knee pad (R/RH).
3.Remove the center cluster upper.
4.Remove the center cluster.
B Refer to the
Instrument Panel Assembly in Body
Structure section.
5.Disconnect the six connectors.
6.Remove the Audio & Switch Assembly.
7.Remove the actuator rod.
8.Remove the mix actuator.
Installation
To install, follow the remove step in the reverse order.