Workshop Manual

6E–543
6VE1 3.5L ENGINE DRIVEABILITY AND EMISSIONS
2.Connect the ION sensing module connectors as
shown in the illustration.
060RY00003
Legend
(1) Green Color Connector
(2) Blue Color Connector
3.Connect the negative battery cable.
Mass Air Flow (MAF) Sensor
Removal Procedure
1.Disconnect the negative battery cable.
2.Disconnect the electrical connector from the MAF
sensor.
TS23740
3.Loosen the clamps which secure the intake air duct
and the air cleaner to the MAF sensor.
4.Remove the intake air duct from the MAF sensor.
5.Remove the MAF sensor from the air cleaner.
TS23781
Installation Procedure
1.Install the MAF sensor on the air cleaner with the
clamp.
2.Install the intake air duct and the clamp on the MAF
sensor.
TS23781
3.Tighten the clamps to secure the MAF sensor to the
intake air duct and the air cleaner.
4.Connect the MAF electrical connector.
5.Connect the negative battery cable.