Workshop Manual

6E–544
6VE1 3.5L ENGINE DRIVEABILITY AND EMISSIONS
Manifold Absolute Pressure
(MAP) Sensor
Removal Procedure
1.Disconnect the negative battery cable.
2.Disconnect the electrical connector from the MAP
sensor.
055RY00001
3.Remove the bolt securing the MAP sensor to the
mounting bracket on the common chamber.
4.Remove the MAP sensor from the mounting bracket.
055RW002
Installation Procedure
1.Install the MAP sensor in the mounting bracket.
055RW002
2.Install the mounting bracket retaining bolt on the
common chamber.
Tighten
B Tighten the bolt to 20 N·m (12 lb ft.).
3.Connect the MAP electrical connector.
055RY00001
4.Connect the negative battery cable.