Workshop Manual

6F–3
ENGINE EXHAUST (6VE1 3.5L)
Three Way Catalytic Converter RH and Forked Exhaust Pipe
Three Way Catalytic Converter RH and Forked Exhaust Pipe and Associated
Parts
150RY00003
Legend
(1) Front Exhaust Pipe Assembly Fixing Nuts
(2) O2 Sensor Terminal Connector
(3) Three Way Catalytic Converter RH
(4) Mounting Rubber
(5) Forked Exhaust Pipe Fixing Bolts
(6) O
2 Sensor Terminal Connector
(7) Forked Exhaust Pipe
(8) Forked Exhaust Pipe Fixing Nuts
(9) Exhaust Silencer Fixing Nuts
(10) Forked Exhaust Pipe Fixing Bolts
Removal
1.Disconnect battery ground cable.
2.Lift up the vehicle and support with suitable safety
stands.
3.Disconnect O
2 sensor harness connectors (2) (6).
4.Remove the forked exhaust pipe fixing bolts and nuts
(5) (8) (10) and the exhaust silencer fixing nuts (9),
then remove the forked exhaust pipe (7) and the
mass damper.
5.Remove the front exhaust pipe assembly fixing nuts
(1) and the mounting rubber (4), then remove the
three way catalytic converter (3).
Installation
1.Install the three way catalytic converter (3) and the
mounting rubber (4), and tighten the fixing nuts (1) to
the specified torque.
Torque
Nuts : 67 N·m (49 lb ft)
2.Install the forked exhaust pipe (7), and tighten the
fixing bolts (5) & nuts (8) (9) to the specified torque.
Torque
Bolts&Nuts : 43 N·m (32 lb ft)
Nuts : 43 N·m (32 lb ft)
3.Connect the O
2 sensor connectors (2) (6).