Workshop Manual

7A–38
AUTOMATIC TRANSMISSION (4L30–E)
Removal
1.Disconnect battery ground cable.
2.Remove transfer protector (4×4) and fairing plate.
150R200001
3.Remove rear propeller shaft and front propeller shaft
(4×4).
NOTE: Apply alignment marks on the flange at both front
and rear sides.
401RW008
401R200008
4.Remove center exhaust pipe (4×4).
5.Remove fuel pipe heat protector and clip from third
crossmember.
6.Disconnect fuel pipe bracket from third crossmember.
141RW004