Workshop Manual

7A–39
AUTOMATIC TRANSMISSION (4L30–E)
7.Disconnect fuel pipe bracket from transmission side.
141R200003
(4×4)
240R200010
(4×2)
141R200002
Fuel hose connector removal procedure
If removal of the fuel hose connector is required for
transmission servicing and/or replacement, follow the
steps below.
141R200001
NOTE:
B An O-ring is used as a seal between the fuel pipe and
the connector. Take care not to damage the contact
surfaces during the removal procedure. Do not allow
the surface to become contaminated with dirt or other
foreign material.
B Perform the entire removal procedure with your
hands. Do not use tools.