Workshop Manual

7A–41
AUTOMATIC TRANSMISSION (4L30–E)
3. Gently pull on the connector to check that it is
securely latched.
141RY00006
8.Disconnect transmission harness connector and clip.
Connector : Adapter case, mode switch, main case,
magnetic sensor, transfer switch (4×4), 2–4 actuator
(4×4) and car speed sensor.
9.Remove harness heat protector.
815RW002
10.Support transmission with a jack.
Remove rear mount nuts from third crossmember.
(4×4)
F07RW008
(4×2)
F07R100005
11.Remove third crossmember.
12.Disconnect transmission oil cooler pipes from A/T
side.
13.Remove oil pipe clamp and bracket from the
converter housing.