Workshop Manual

7A–44
AUTOMATIC TRANSMISSION (4L30–E)
4.Install under covers to the transmission and engine.
5.Install starter.
Torque: 40 N•m (30 lb ft)
6.Install select cable by connecting inner cable to select
lever and installing outer cable with bracket.
256RW025
7.Connect transmission oil cooler pipes to A/T.
Torque: 44 N•m (33 lb ft)
8.Install oil cooler pipe clamp and bracket to the
converter housing.
(4×4)
253RY001
9.Tighten oil cooler pipe clamp bolt at the engine mount
side.
10.Install third crossmember.
Torque: 116 N•m (85 lb ft)
11.Install rear mount nuts.
Torque: 50 N•m (37 lb ft)
(4×4)
F07RW008
(4×2)
F07R100005