Workshop Manual

2A–18
POWER–ASSISTED STEERING SYSTEM
Power Steering Unit
Power Steering Unit and Associated Parts
440R100001
Legend
(1) Bracket
(2) Transfer Gear Assembly
(3) Universal Joint Assembly
(4) Power Steering Unit Assembly
(5) Crossmember
Removal
1.Remove the stone guard.
2.Remove the transfer gear assembly and universal
joint assembly.
Make a setting mark across the coupling flange and
transfer gear assembly to ensure reassembly of the
parts in the original position.
3.Drain power steering fluid.
4.Remove the tie rod end assembly from knuckle.
Use tie rod end remover J–29107.
433RW002